Programmable Display

Programmable Display

The Programmable Display is plugged into Optimax main monitoring unit, and can be programmed to display the data from any intelligent or virtual sensor and shows up to 8 parameters in sequence. LED indicators alerts if a sensor is in a critical condition. This is then reflected on the screen itself in the form of a critical or warning notification. The display is powered from the intelligent port and measures 1 temperature at the same time.

Installation is performed on the door of an IT rack, on the wall in the room or aisle of the data center.

The display with temperature sensor is connected to the main monitoring unit RAMOS Optimax or RAMOS Plus.

 

Order code:  RMS-P-ST-DSPL

Where to buy
Print Favorities E-mail Twitter RSS
  • RMS-P-ST-DSPL_web.jpg

Display:

  • Permanently displayed built-in temperature
  • Blue backlight
  • Display of up to 8 sensors in a standard rotary list, configured via the CONTEG Pro Server web application
  • 2x LED indicator (ORANGE - Warning and RED - Critical)
  • Sensor status display (warning or critical status)
  • Sensor unit display: ° C, ° F,% rh,%, V, (m) A, (k) W, (k) Wh
  • Displays the IP address of the main unit immediately after connection
  • Electronic click status display (open / closed)

Power consumption:

  • 45mA, 0.22W

Power suply:

  • 5V via intelligent port

Package includes:

  • 1.5 m cable LAN CAT 5

Suitable for:

  • RAMOS Plus or RAMOS Optimax