Managed PDUs
CONTEG » Products IT » Power Distribution Units »  Managed PDUs

Managed PDUs

Managed power distribution units provide the supply of energy, remote control over individual outlets (switching on/off) thus enable server restart and further monitoring of energy consumption from individual outlets (PDU versions with POM designation).

Managed PDUs measure voltage and frequency, allow reporting of the load power factor, active and apparent power, and energy consumption (in kWh).

The device has an illuminated display located on the device or separately next to the power distribution unit, which is suitable for critical IT devices that require an uninterrupted power supply.

The built-in web server enables the remote setting of the unit, reading the information, and management of the outlets of the specific PDU from a user-friendly web interface.

Managed PDUs allow integrating into a CONTEG Pro Server monitoring system for central management or into a third party system (MIB table available).

Hybrid access technology—Ethernet connectivity and serial communication; both interfaces can be accessed simultaneously and independently.

PDUs are compatible with 19" IT racks.

Placement in the rack—types for horizontal and vertical mounting.

 

Where to buy
Print Favorities E-mail Twitter RSS
  • PDU-IPSEA.jpgrizene-pdu2_WEB.jpgrizene-pdu3_WEB.jpgIP-SEA-008C300016_WEB.jpgPDU-colors-WEB.jpgcontrol-panel.jpgconteg-pro-server.jpg

Material
  • 1.5 mm anodized aluminum with a protective layer against oxidation with brackets made of stainless steel
Dimensions
  • Length: predefined by type, or can be adjusted for the configuration of choice
  • Height: 65 mm
  • Depth: 52.6 mm
Color
  • Black, red, blue, green, yellow, orange, white
Display
  • Illuminated LCD
Connection
  • 1-phase 230 V AC or 3-phase 230/400 V AC, 16 A or 32 A
Measurement
  • RMS value of current
  • Voltage (V) and frequency
  • Load power factor
  • Total energy consumption
  • True (W) and apparent power (VA)
  • Measurement error <1 %
Data bus
  • 2× RJ45 data bus RS-485 connectors
Ethernet
  • RJ45 connector
  • TCP/IP 10/100 Mb/s, DHCP with back-up static IP, SNMP, Modbus, API
Sensor port
  • Option to connect temperature and humidity sensor
Operating temperature range
  • 0–60 °C
Protection
Unrestricted choice of fuse type including:
  • Miniature Circuit Breaker (MCB)
  • Thermal fuse
  • Glass cartridge fuse holder
  • PASCO cartridge holder
Overvoltage protection
  • Optionally as a Hot Swap module
Power consumption
  • < 3 W
MANAGED POWER DISTRIBUTION UNITS
Code1 Mounting* H(v U) Input plug Power cable length (m) Outlet type 1
 Number of type 1 outlets Outlet type 2 Number of type 2 outlets Rated current (A) Dimensions (mm)
H W D
IP-SEA-008C300016
 19" 1.5 C20 - ** C13 8 - - 1x16A 65 440 112
IP-SEA-008C3POM16 19" 1.5 C20  - ** C13 8 - - 1x16A 65 440 112
IP-SEA-018C36C916 Vertical - C20 - ** C13 18 C19 6 1x16A 1570 65 56
P-SEA-018C36C9POM16 Vertical - C20 - ** C13 18 C19 6 1x16A 1570 65 56
IP-SEA-318C36C932 Vertical - EN 60309 3 C13 18 C19 6 1x32A 1680 65 56
IP-SEA-318C36C9POM32 Vertical - EN 60309 3 C13 18 C19 6 1x32A 1680 65 56
IP-SEA-318C36C911 Vertical - EN 60309 3 C13 18 C19 6 3x16A 1610 65 56
IP-SEA-318C36C9POM11 Vertical - EN 60309 3 C13 18 C19 6 3x16A 1610 65 56
IP-SEA-318C36C922 Vertical - EN 60309 3 C13 18 C19 6 3x32A 1700 65 56
IP-SEA-318C36C9POM22 Vertical - EN 60309 3 C13 18 C19 6 3x32A 1700 65 56
* 19" = horizontal mounting onto 19" extrusions.
** Power supply cables must be ordered separately.
1 The standard unit color is black. To order the unit in a different color, fill the suffix of the color of choice into the product's code. Suffixes: blue (-BU), red (-RD), green (-GN), yellow (-YL), orange(-OR), white (-WH).2 Power supply cables must be ordered separately.

Vertical PDUs are not equipped with brackets which need to be ordered separately.
File type Language version

  • Datasheet PDU (PDF - 4.18MB)
    cs  en  fr  ru   

Tutorials, firmware, videos >>

Datasheet:

Datasheet_Intelligent_Power_Managed