Ventilation Units
CONTEG » Products IT » Targeted Cooling & Ventilation » Ventilation »  Ventilation Units

Ventilation Units

Ventilation units and fans are used to  improve the cooling of equipment installed in the rack. Ventilation units are mounted either on 19" vertical extrusions (horizontally) or on the top or bottom frame of the rack (connecting kit required). Units with 2 to 9 fans are available.

These units are efficient, ecological, economical! New high-quality fans feature electronically commuted synchronic motors, well known as "EC motors". These motors have low power consumption compared to standard AC motors. For example, the power consumption of our new DP‑VEC ventilation unit is seven times lower then the standard D-VEN with equal air-flow. On the top of it, DP-VEC provides up to 60% more air-flow than the standard DP-VEN.

 

Where to buy
Print Favorities E-mail Twitter RSS
  • DP-VEN-06DP-VEN-03DP-VE-ROV_special perforation - detailDP-VE-01_in rackDP-VE-01

 

Ventilation units - DP-VEN

  • One to nine fans
  • Possible to install:
    a) in 19" extrusions - horizontally
    b) on the top or bottom frame of free-standing racks
  • Connecting kit for ventilation unit is needed when installing on top or bottom frame
  • Temperature range -10 °C to 55 °C
  • Thermostat ranging from 0 °C to 60 °C included; no thermostat option
  • Voltage range 230V/50Hz (48V DC option)
  • Protection category to EN 60 529 IP 20
  • Color: RAL (standard RAL 9005)
  • Enhanced option DP-VEN-xx-E

Information on installation options (into top or bottom frame of ROR rack series) available upon request

Fans - DP-VE

  • Possible to install:
    a) on side or top of wall-mounting rack, special perforation needed (part number of the wall mounting cabinet to add a suffix VH for two side perforations or TH for two top frame perforations)
    b) in top or bottom frame of distribution rack, requires perforated gland plate DP-VE-ROV2 or DP-VE-ROV4
  • Mounting kit included
  • Code: DP-VE-01

Ventilation units DP-VEC

  • Two to nine fans
  • Possible to install:
    • a) in 19" extrusions – horizontally
    • b) in top or bottom frame of free-standing racks
  • Connecting kit for ventilation unit is needed when installing on top or bottom frame
  • Temperature ranges from ‑10 °C to 55 °C
  • Thermostat ranging from 0 °C to 60 °C included; no thermostat option
  • Voltage range 230 V/50 Hz (48V DC option)
  • Protection category to EN 60 529 IP 20
  • Color: RAL (standard RAL 9005)
  • High‑end versions with the most efficient EC fans DP‑VEC

All DP-VEN and DP-VEC units are compatible with all Conteg products

 

Mounting scheme

 

Ordering Codes for ventilation units
VENTILATION UNITS
Code Airflow (m3/h) Rated current max. (A) Power consumption (W) Annual power consumption1 (kWh/year) Possible heat removal 2 (kW) Package
STANDARD AC FANS Specific Fan Power (SFP) = 611 W/(m3/s)  
DP-VEN-02 224 0.180 38 333 0.38 1 pc
DP-VEN-03 336 0.270 57 499 0.57 1 pc
DP-VEN-04 448 0.360 76 666 0.76 1 pc
DP-VEN-06 672 0.540 114 999 1.14 1 pc
DP-VEN-09 1008 0.810 171 1498 1.71 1 pc
HIGH-END EC FANS Specific Fan Power (SFP) = 88 W/(m3/s)  
DP-VEC-03 540 0.057 13.2 116 0.92 1 pc
DP-VEC-06 1080 0.114 26.4 231 1.84 1 pc
DP-VEC-09 1620 0.171 39.6 347 2.75 1 pc

1 For non-stop operation

2 If temperature difference between intake and exhaust air from the rack is Δt=5 K

Connecting kit for installation in top or bottom frame of free-standing racks
Ventilation unit type  600, 800 or 1 200 mm depth
 1 000 mm depth
Without filter Without filter With filter
DP-VEx-02, 03 DP-VER-03 DP-VER-03F DP-VER-031 DP-VER-031F
DP-VEx-04, 06 DP-VER-06 DP-VER-06F DP-VER-061 DP-VER-061F
DP-VEx-09 - - DP-VER-091 DP-VER-091F

Replace x with N or C

FANS
Code Airflow (m3/h) Rated current max. (A) Power consumption (W) Annual power consumption1 (kWh/year) Possible heat removal 2 (kW) Package
STANDARD AC FANS Specific Fan Power (SFP) = 611 W/(m3/s)  
DP-VE-01 112 0.09 19 166 0.19 1 pc
DP-VEN-01 112 0.09 19 166 0.19 1 pc

1 For non-stop operation
2 If temperature difference between intake and exhaust air from rack is Δt=5 K

LITE VENTILATION UNIT
Code Description Package
DP-VEL-02 Ventilation unit, 2 fans, with thermostat, for top or bottom installation into racks withdepths of 600, 800 and 1200 mm
  1 pc
DP-VEL-02B Ventilation unit, 2 fans, without thermostat, for top or bottom installation into rackswith depths of 600, 800 and 1200 mm 1 pc
DP-VEL-02/100 Ventilation unit, 2 fans, with thermostat, for top or bottom installation into racks withdepths of 1000 mm 1 pc
DP-VEL-02B/100 Ventilation unit, 2 fans, without thermostat, for top or bottom installation into rackswith depths of 1000 mm 1 pc
DP-VEL-04 Ventilation unit, 4 fans, with thermostat, for top or bottom installation into racks withdepths of 600, 800 and 1200 mm 1 pc
DP-VEL-04B Ventilation unit, 4 fans, without thermostat, for top or bottom installation into rackswith depths of 600, 800 and 1200 mm 1 pc
DP-VEL-04/100 Ventilation unit, 4 fans, with thermostat, for top or bottom installation into racks withdepths of 1000 mm 1 pc
DP-VEL-04B/100 Ventilation unit, 4 fans, without thermostat, for top or bottom installation into rackswith depths of 1000 mm 1 pc

 

FANS
Code Airflow (m3/h) Rated current max. (A) Power consumption (W) Annual power consumption1 (kWh/year) Possible heat removal 2 (kW)
DP-VEL-02 224 0.180 38 333 0.38
DP-VEL-04 448 0.360 76 666 0.76

1 For non-stop operation
2 If temperature difference between intake and exhaust air from rack is Δt=5 K

File type Language version

  • Datasheet Ventilation units (PDF - 0.28MB)
    cs  de  en  fr  ru   

Datasheet:

Datasheet_Ventilation_units