Face Recognition Reader with a Multi-format RFID Reader

Face Recognition Reader with a Multi-format RFID Reader

The on-wall biometric reader for face recognition with a multi-format RFID reader can be programmed to open a door 3 different ways, by recognizing the geometry of a face, or by recognizing a face and an RFID medium, or simply by using an RFID medium.

The integrated multi-format RFID reader offers the possibility of reading RFID media on both 125 kHz and 13.56 MHz (e.g. MIFARE® media).

Thanks to the operational lighting of the terminal from 0 lx to 25,000 lx, this device can operate reliably even in complete darkness at the place of installation.

IR camera for capturing the face is equipped with an infrared-based fake face blocking technology (LFD), thus prevents spoofing by printed images and LCDs.  The device is connected to the RAMOS ACS access control system via a Wiegand protocol.




Where to buy
Print Favorities E-mail Twitter RSS
  • obr1.jpgobr2.jpgobr3.jpg
  • 2” color TFT LCD
  • User Matching: 1:3,000 match/sec
  • Group Matching: 1:5,000 match/sec
  • Can read EM & HID prox. (125 kHz) EM a cards/tags MIFARE, MIFARE Plus, DESFire/EV1, FeliCa (13.56MHz)
  • Operating illuminance: from 0lx to 25,000lx
  • Memory:  8GB Flash + 1GB RAM
  • 4 function buttons below display
  • RS-485:  1ch Host or Slave (Selectable)
  • Wiegand : 1ch Input or Output (Selectable)
  • Ethernet: 10/100Mbps, auto MDI/MDI-X
  • Relay: 1ch Output max. 30VDC/2A
  • Temper supported
  • IP protection: IP40
  • Operating Temperature: -20°C up to 50°C
  • Dimensions: 80 x 160.3 x 71.8 mm
  • Package includes: 24VDC/2.5A power supply in a connection box with power and connection cable, wall-mounting kit

Have a closer look at a face recognition reader:

Download a product datasheet >>